By Carolyn Jackson
Part of preventive maintenance on any paved surface involves sealing the asphalt so that it can be protected from elements of weather. Sealing is a very important process that comes with many benefits as outlined below. The service of applying a sealer over paved surfaces is provided by many service companies that one can employ easily to have the job done. How long the process take depends on the area that needs to be sealed. Here are facts regarding Seal coating in Seneca SC.
The life span of a paved surface is increased several times when it is sealed properly. Oxygen, moisture, and other substances in the environment usually cause oxidation to asphalt that is left unsealed. When oxidized, the asphalt hardens and crumbles. This can reduce its life span a lot.
Apart from extending the lifespan of the asphalt, beauty of the surface is also enhanced when it is sealed. The surface is made to be shiny and beautiful when the sealer is applied. In fact, if the sealer is applied after the cracks and voids have been sealed properly, the surface appears even more attractive. The quality of the end results depends on the level of preparation made.
The environment exposes pavements to many elements and substances. These include salts, snow, moisture, and chemicals among many others. The substances enter voids and cause cracking. Lines of weakness are formed by the cracks, encouraging more damage. Such damage can be prevented by applying a sealer. The availability of tools like squeegees and sprayers make the application process very easy.
This process is very simple and can be done by owners of small businesses or homeowners without involving professional service companies. Before doing it, one is advised to check the weather forecast. This is important because during and after the application, the weather should remain dry without rain or snow for at least 48 hours. The parking lot, driveway, or walkway should also be barricaded in advance to make sure that there is no traffic.
The sealer should be applied on a clean surface for adequate adherence. A power washer or sweeping can be used to clean the surface. The sealer should be applied after all water on the surface has dried in case one uses a power washer. Asphalt should then be used to patch holes and cracks once the surface is dry.
The sealer should only be applied after one is sure that all voids and cracks have been sealed completely. A sprayer or squeegee can be used for the application. If there are any instructions provided by the manufacturer regarding the application, one must make sure that they follow them to the latter. One should use a sprayer if the surface being sealed is large.
The first layer has to dry completely before the second layer is applied. This means that the first layer should be given about a day to dry before another layer is applied. Areas that might have been missed during the initial application should be given more attention during the application of the second coat. It takes about 36 hours to complete the whole process.
The life span of a paved surface is increased several times when it is sealed properly. Oxygen, moisture, and other substances in the environment usually cause oxidation to asphalt that is left unsealed. When oxidized, the asphalt hardens and crumbles. This can reduce its life span a lot.
Apart from extending the lifespan of the asphalt, beauty of the surface is also enhanced when it is sealed. The surface is made to be shiny and beautiful when the sealer is applied. In fact, if the sealer is applied after the cracks and voids have been sealed properly, the surface appears even more attractive. The quality of the end results depends on the level of preparation made.
The environment exposes pavements to many elements and substances. These include salts, snow, moisture, and chemicals among many others. The substances enter voids and cause cracking. Lines of weakness are formed by the cracks, encouraging more damage. Such damage can be prevented by applying a sealer. The availability of tools like squeegees and sprayers make the application process very easy.
This process is very simple and can be done by owners of small businesses or homeowners without involving professional service companies. Before doing it, one is advised to check the weather forecast. This is important because during and after the application, the weather should remain dry without rain or snow for at least 48 hours. The parking lot, driveway, or walkway should also be barricaded in advance to make sure that there is no traffic.
The sealer should be applied on a clean surface for adequate adherence. A power washer or sweeping can be used to clean the surface. The sealer should be applied after all water on the surface has dried in case one uses a power washer. Asphalt should then be used to patch holes and cracks once the surface is dry.
The sealer should only be applied after one is sure that all voids and cracks have been sealed completely. A sprayer or squeegee can be used for the application. If there are any instructions provided by the manufacturer regarding the application, one must make sure that they follow them to the latter. One should use a sprayer if the surface being sealed is large.
The first layer has to dry completely before the second layer is applied. This means that the first layer should be given about a day to dry before another layer is applied. Areas that might have been missed during the initial application should be given more attention during the application of the second coat. It takes about 36 hours to complete the whole process.
About the Author:
Discover seal coating in Seneca SC when you pay a visit to the suggested website. Here is the web page for a quick review at http://www.clemsonsealcoating.com.